Camion usato volvo fh 500 - falkom faw 25.000 - !! viewing by appointment only !! gasolio

Listino di vendita :

Prezzo su richiesta

Ritorno alla ricerca

Camion Volvo 500 - FALKOM FAW 25.000 - !!...

Riferimento HE-NE

Camion usato Volvo FH 500 - FALKOM FAW 25.000 - !! Viewing by appointment only !! Gasolio

130 000 Km
37 Tonnellate
03/01/2020
6004 RM Weert
Volvo Euro 6
Volvo

Informazioni principali
Rif. cliente:	HE-NE
Rif. sito web:	11304821
Carrozzeria	--
Marca	Volvo
Gamma (marca : Volvo)	FH
Modello	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Stato	Usato
Data della prima immatricolazione	03/01/2020
Paese	PAESI-BASSI
Costruttore	Volvo

Informazioni supplementari Volvo 500 - FALKOM FAW...
Data dell'ultimo collaudo	03/01/2026
Scadenza collaudo	03/01/2027
Rallentatore idraulico

Informazioni cabina FH
Lunghezza della cabina	Corta

Cambio e trasmissione
Cambio	Cambio automatico
Precisione cambio	Automaat

Tonnellaggio
Carico utile	13.28 Tonnellate
Tara	23.73 Tonnellate
Peso a pieno carico	37 Tonnellate

Attrezzatura Camion Volvo
Sospensione Aria Sospensioni Meccaniche ABS Regolatore di velocità

Caratteristiche Volvo FH
Chilometraggio	130 000 km
Norme Euro	Volvo Euro 6
Paese (gamma)	PAESI-BASSI

Stato del materiale
Energia	Gasolio

Pneumatici
Stato e dimensioni dei pneumatici	22.5

Sospensioni/Assi
Assi	8x4
Passo	5.6 metri

Motore
Cilindrata	12777 cm3
Numero dei cilindri	6
Potenza motore	375 kW
Potenza	509 CV

Attrezzatura cabina
Aria condizionata Chiusura centralizzata

Note
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Vedere tutto

Note

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

Falkom wrecker installation type FAW 25.000
- One main arm.
- A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m.
- A fully hydraulic installation consisting of:
- hoses
- couplings
- pipes
- 8-function valve block
- Two double-acting lifting cylinders take care of the up and down movement of the main arm.
- The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d.
- The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004).
- 2 anchors model working independently of each other standard.
- A lift beam (100 x 100 mm tube).
- Three sets of fork holders.
- 4 sets of V forks.
- 1 Set of chain forks.
- 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks).
- Set of Scania claws with mounting brackets on the lift beam.
- Set of air suspension forks.
- 1 bus frame.
- Tow bar mounted.
- Shovel and broom mounted.
- Oil tank.
- Pulling device with trawler in combination with a semi-trailer link.
- Supported drawbar coupling support.
- Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel.
- Hydraulic double pump.
- Radio remote control for all functions, excluding anchor shovels
- Complete installation is stacked / metallized.
- Built according to CE guidelines.
- Assembly of the air hands and electrical connections of the truck at the rear in the body.
- Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis.
- LED light bar mounted on the flyer.
- Lighting control switches mounted in the control box and in the cabin.
- LED flash lamps mounted at the rear.
- 6 work lights mounted (under the flyer, high at the rear and low).
- LED lamps mounted on the corners of the enclosure.
- Starting aid 12/24 volts.
- Air reel mounted.
- Spray the installation in finish.
- 7-wire electrical cable reel installed.
- Container for counterweight mounted behind the cab.
- Base plate for lateral stability (standard legs only)
- 2 fork raisers
- 2 pieces of anchor plates for Wheel chocks
- Two WLL 15 tonne folding discs
- European approved buffer beam at the rear.
- Pulling device with pin 40, 50 and 60 mm
- 2 models towing eyes.
- RDW inspection and, if necessary, TüV.
- Ballast under the bumper.

More information

Cab: Globetrotter, single
Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Registration number: 28-BPD-3

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

Kabine: Globetrotter, einfach
Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Kennzeichen: 28-BPD-3

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Cabine: Globetrotter, enkel
As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
Kenteken: 28-BPD-3

Référence parc : 323949,
Année de construction : 2020,
Nombre de roues motrices : 4,
Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5,
Nombre d'essieux : 4,
Suspension d'essieu,
Stores,
Capacité : 13tonnes,
Capacité maximum : 13tonnes,
Prise de force,
Visière pare-soleil,
Charge utile : 13.275tonnes,
Autoradio,
Nombre de portes : 2,
Couchette chauffeur,
Poids : 23.725kg,
Frein à disque,
Vitres électriques,
Capacité de chargement : 13275kg,
Tempomat,
Cruise control,
Vitres électriques,
Type d'intérieur : Autre,
Type de pneus : Jumelés,
Couleur : Jaune

Vedere tutto

Note
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Note

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Storico del veicolo

Verifica lo storico del veicolo con

Listino di vendita

Prezzo su richiesta

Informazioni principali
Rif. cliente:	HE-NE
Rif. sito web:	11304821
Carrozzeria	--
Marca	Volvo
Gamma (marca : Volvo)	FH
Modello	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Stato	Usato
Data della prima immatricolazione	03/01/2020
Paese	PAESI-BASSI
Costruttore	Volvo

Informazioni supplementari Volvo 500 - FALKOM FAW...
Data dell'ultimo collaudo	03/01/2026
Scadenza collaudo	03/01/2027
Rallentatore idraulico

Informazioni cabina FH
Lunghezza della cabina	Corta

Cambio e trasmissione
Cambio	Cambio automatico
Precisione cambio	Automaat

Tonnellaggio
Carico utile	13.28 Tonnellate
Tara	23.73 Tonnellate
Peso a pieno carico	37 Tonnellate

Attrezzatura Camion Volvo
Sospensione Aria Sospensioni Meccaniche ABS Regolatore di velocità

Caratteristiche Volvo FH
Chilometraggio	130 000 km
Norme Euro	Volvo Euro 6
Paese (gamma)	PAESI-BASSI

Stato del materiale
Energia	Gasolio

Pneumatici
Stato e dimensioni dei pneumatici	22.5

Sospensioni/Assi
Assi	8x4
Passo	5.6 metri

Motore
Cilindrata	12777 cm3
Numero dei cilindri	6
Potenza motore	375 kW
Potenza	509 CV

Attrezzatura cabina
Aria condizionata Chiusura centralizzata

Note
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Vedere tutto

Note

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Vedere tutto

Note
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Note

🇬🇧 Information in English:
Additional options and accessories